Acoustic genset enclosures for standby and prime power, sized and finished to the site they will stand in.
Whether you are an OEM moving enclosure volume from an existing supplier or an end user commissioning standby power at a single site, the enclosure has to handle the engine and alternator's thermal load, route exhaust safely and hold the noise limit set by the location.
At a glance
- SegmentDiesel & gas genset enclosures
- Typical buyersGenset OEM procurement, industrial end-users
- Core disciplineRepeatability, acoustic performance, thermal load
- CoatingISO 12944 C5M as standard
What we supply
Scope of supply
What Powervault supplies
- ISO-format steel shell, corrosion-rated envelope
- Structural frame and roof
- Acoustic lining
- HVAC, ventilation and exhaust routing provisions
- Cable and fuel line entries
- Internal fit-out — lighting, small power, cable trays and control panel mounting
- C5M marine-grade coating system
- Weld, paint and acoustic performance testing
Customer-supplied
- The generator set / engine-alternator package
- Control panel internals
- Fuel tank and fuel supply system, unless otherwise specified
- Synchronising equipment
- Site foundation and earthing
Configuration options
Sizes and finishes, not fixed part numbers
| Parameter | Range offered |
|---|---|
| Footprint | Sized to genset kVA class |
| Acoustic treatment | Standard · enhanced · super-silent |
| Coating grade | C3 / C4 / C5M |
| Insulation | Thermally rated panel options |
| Fit-out level | Shell only for OEM line assembly, through to fully outfitted |
Standards for this segment
Engineered to. Not implied.
| Standard | Scope | Status |
|---|---|---|
| EN 1090 / ISO 3834 | Structural steelwork and welding quality | Engineered to |
| ISO 5817 / ISO 9606 | Weld quality levels and welder qualification | Engineered to |
| ISO 12944 C5M | High-corrosivity marine coating system | Engineered to |
| ISO 1461 | Hot-dip galvanizing | Specified where required — hot-dip galvanizing of designated parts by approved galvanizer |
| IS 800 / IS 2062 | Indian structural steel design and material | Engineered to |
| ISO 668 / ISO 1496 | Dimensions, ratings and structural testing (ISO Series 1 format) | Engineered to — ISO 1496-1 type approval in progress |
Certification scope is confirmed per customer requirement at order stage.
Engineering notes
What we've actually thought about here
- Jig-built repeatability means an OEM can take enclosure volume off an existing supplier without a design review on every order.
- Access panel and louvre layout is coordinated with each OEM's genset footprint and airflow drawing before tooling is cut.
- Enclosures are built to the same weld and coating specification, whether the order is one unit or a volume programme.
Get a technical response
Send us your genset enclosure specification.
Application, sizing, coating grade and governing standard — the more you give us, the faster we can price it.